IC8 REMOTE/UNDERSINK CHILLER
 
GENERAL FEATURES:
The Waterworks Undersink compact, remote chiller is designed for use with drinking fountains, filters, bubblers or glass fillers, thereby enabling any drinking station to supply chilled refreshing water. It can be installed under a sink or bench, in the ceiling, on a column, an adjacent wall, or in a service area. In fact it’s perfect for virtually any single remote outlet at home or in the office and with the addition of optional filtration, it delivers fresh, clean, chilled water at the touch of a button.
 
SPECIFICATIONS
CABINET:
The IC8 cabinet is constructed of powder coated galvalume which provides the IC8 with an easy clean, corrosion resistant finish.
 
CHILLING & STORAGE TANK:
Constructed of stainless steel, it has a volume of 1.9 Litres, is fully insulated and independently tested to withstand over 800psi of static pressure.  A drain plug and seal is provided, which is removable for servicing. The internal waterlines are 1/4”OD stainless steel and are heliarc welded to eliminate corrosion.
 
REFRIGERATION SYSTEM:
This fan assisted, static condenser system utilises R134a refrigerant which is non toxic, non-flammable and non ozone depleting. Refrigerant flow is controlled by capillary tube, which has no moving parts. The compressor is protected by an automatic overload, is lifetime lubricated and hermetically sealed. The tube on tank style evaporator has six (6) windings around the storage tank for balanced, efficient cooling and the entire system is controlled by an adjustable, (factory pre- set), thermostat.
 
INSTALLATION
GENERAL:
The Waterworks undersink chiller is ideally suited to installation within a relatively confined space such as under the kitchen sink. As a refrigeration appliance however, it relies upon air exchange to function properly and therefore must be provided with adequate ventilation.
 
PLUMBING CONNECTIONS:
Both the inlet and outlet are recessed, 1/4” stainless steel pipes, suitable for connection to industry standard 1/4” quick connect fittings.
 
ELECTRICAL CONNECTIONS:
The Waterworks IC8 has a 1.5 metre GPO power cable and plug. 240volts, 50Hz. Single phase. Running amps - 0.74A. Power consumption - 120W (Cooling Capacity).
 
COOLING PERFORMANCE:
The Waterworks Undersink Chiller is capable of cooling approximately 8*LPH (litres per hour) at 10°C.
Cooling Speed: From 27°C to 10°C, 21.6 minutes
Cooling Capacity: 8 litres/hour/10°C ± 2°C
Draw Off Capacity: 8 cups below 10°C
 
Weights and Dimensions:
WEIGHT: 12.5kg
WIDTH: 210mm
DEPTH: 410mm
HEIGHT: 290mm